Table of Contents
Advertisement
RRP14.23 ROLL ASSY FEED (PL 14.4.11)
[Removal]
1)
Remove 500 SHEET PAPER TRAY. (RRP 14.1)
2)
Remove 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
3)
Remove CLUTCH ASSY PH. (RRP 14.11)
4)
Remove DRIVE ASSY FEED. (RRP 14.9)
5)
Remove HOUSING ASSY FEED. (RRP 14.18)
6)
Remove the two screws (silver, tap, 8mm) that fix COVER FEED (PL 14.4.13) to HOUSING
ASSY FEED.
7)
Remove COVER FEED from HOUSING ASSY FEED.
8)
Remove the E rings that fix both sides of SHAFT FEED (PL 14.4.12) to HOUSING ASSY
FEED, and remove the left and right BEARING EARTH (PL 14.4.9).
9)
First slide SHAFT FEED to the right, pull out SHAFT FEED from the left side bearing of
HOUSING FEED ASSY, and remove SHAFT FEED together with ROLL ASSY FEED (PL
14.4.11) and ROLL SUPPORT (PL 14.4.10).
10) Release the hook of the right side ROLL SUPPORT on SHAFT FEED, and remove ROLL
SUPPORT.
11) Release the hook that fix ROLL ASSY FEED to SHAFT FEED and remove ROLL ASSY
FEED.
[Replacement]
Pay attention to fitting direction of ROLL ASSY FEED when carrying out the work shown
below.
1)
Attach ROLL ASSY FEED to SHAFT FEED so that the hook is directed rightward, and fix the
hook of ROLL ASSY FEED to the groove of SHAFT FEED.
2)
Attach ROLL SUPPORT to SHAFT FEED, and fix the hook of ROLL SUPPORT to the groove
of SHAFT FEED.
3)
After placing the right side of SHAFT FEED in the right side bearing of HOUSING ASSY
FEED, slide SHAFT FEED to the left, and attach SHAFT FEED together with ROLL ASSY
FEED and ROLL SUPPORT.
4)
Match the double D-cut section of BEARING EARTH to the both side bearing of HOUSING
ASSY FEED, attach BEARING EARTH. Fix the both side of SHAFT FEED using the E rings.
5)
Attach COVER FEED to HOUSING ASSY FEED.
6)
Fix COVER FEED to HOUSING ASSY FEED using the two screws (silver, tap, 8mm).
7)
Attach HOUSING ASSY FEED. (RRP 14.18)
8)
Attach DRIVE ASSY FEED. (RRP 14.9)
9)
Attach CLUTCH ASSY PH. (RRP 14.11)
10) Attach 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
11) Attach 500 SHEET PAPER TRAY. (RRP 14.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 343
Advertisement
Chapters
Table of Contents
