Dell 3010CN Service Manual page 275

RRP5.10 PHOTO SENSOR (PL 5.2.19)
[Removal]
1) Remove VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)
2) Remove MOTOR-PH. (RRP 5.11)
3) Remove GEAR ASSY DRIVE. (RRP 5.14)
4) Release the three hooks that fix PHOTO SENSOR to VERTICAL TRANSPORT ASSEMBLY
(PL 5.2.1) and remove PHOTO SENSOR.
5) Remove connector (P/J102) of PHOTO SENSOR (PL 5.2.19).
[Replacement]
1) Attach connector (P/J102) of PHOTO SENSOR.
2) Match the three hooks of PHOTO SENSOR to the fitting position and attach PHOTO
SENSOR to VERTICAL TRANSPORT ASSEMBLY.
3) Attach GEAR ASSY DRIVE. (RRP 5.14)
4) Attach MOTOR-PH. (RRP 5.11)
5) Attach FRAME-ASSY-PH. (RRP 5.3)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 177