Table of Contents
Advertisement
RRP6.11 PLATE BIAS-2ND ASSY (PL 6.1.23)
[Removal]
1)
Remove COVER ASSY RH. (RRP 1.12)
2)
Remove LEFT COVER. (RRP 1.10)
3)
Remove FUSER CHUTE ASSEMBLY, BIAS TRANSFER ROLL(BTR) COVER. (RRP 6.1)
4)
Remove 2ND BTR ASSY. (RRP 6.4)
5)
Remove the two screws (silver, tap, 6mm) that fix PLATE BIAS-2ND ASSY (PL 6.1.23) to the
main unit.
Main unit and PLATE BIAS-2ND ASSY are connected with WIRE ASSY 2BTR, so they
should not be set far apart when carrying out the work shown below.
6)
Release the clamp that fix WIRE ASSY 2BTR (PL 6.1.30) and move PLATE BIAS-2ND ASSY
from the main unit a little.
7)
Remove a screw (silver, tap, 6mm) that fixes terminal part ot WIRE ASSY 2BTR on PLATE
BIAS-2ND ASSY.
8)
Remove WIRE ASSY 2BTR from PLATE BIAS-2ND ASSY and remove PLATE BIAS-2ND
ASSY.
[Replacement]
1)
Attach WIRE ASSY 2BTR (PL 6.1.30) to PLATE BIAS-2ND ASSY (PL 6.1.23).
2)
Fix terminal part of WIRE ASSY 2BTR to PLATE BIAS-2ND ASSY using a screw (silver, tap,
6mm).
Lay WIRE ASSY 2BTR connected to PLATE BIAS-2ND ASSY, so that it doesn't touch
CAM ASSY-2ND when carrying out the work shown below.
3)
Match the boss of PLATE BIAS-2ND ASSY to the hole in the main unit and attach PLATE
BIAS-2ND ASSY.
4)
Fix PLATE BIAS-2ND ASSY to the main unit using two screws (silver, tap, 6mm) and fix
WIRE ASSY 2BTR by the clamp.
5)
Attach 2ND BTR ASSY. (RRP 6.4)
6)
Attach FUSER CHUTE ASSEMBLY, BIAS TRANSFER ROLL(BTR) COVER. (RRP 6.1)
7)
Attach LEFT COVER. (RRP 1.10)
8)
Attach COVER ASSY RH. (RRP 1.12)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 209
Advertisement
Chapters
Table of Contents
