Network Set-Up - Dell 3010CN Service Manual

For additional network set-up configurations, refer to your User's Guide.
Print and Check the Printer Settings Page
1. Print the Printer Settings page.
a. When ready to Print appears in the LCD, press Menu.
b. Press until Configure appears, and then press
c. Press until Reports appears, and then press
d. Printer Settings is displayed. Press
The Printer Settings page is printed.
2. Under the TCP/IP heading, verify the IP address.
If the IP address is 0.0.0.0, wait for a few minutes to resolve the IP address automatically, and then
print the Printer Settings page again.
Run the Installation Software
1. Insert the Drivers and Utilities CD into your computer.
2. The Drivers and Utilities CD should launch the installation software automatically.
If the CD does not automatically launch, click Start
drive letter of your CD), and then click OK.
3. When the Drivers and Utilities CD screen appears, click Network Installation - Install the printer
for use on a network. If using Windows XP, Windows 2000, Windows NT4.0, or Windows 2003
Server, go to step 4. For all other operating systems, go to step 5.
4. For local installation, select Local Installation - Install printer on this computer, and then click
Next.
For remote installation:
a. Select Remote Installation - Install printer on one or more remote computers, and then click
Next.
b. Enter your Administrator user name, password, and clients or servers and then click Add.
c. Click Next.
5. Select the network printer you would like to install. If you do not see your printer listed, click Update
to refresh the list or click Add Printer to add a printer to the network. You may update the IP
address and port name at this point. Click Next.
6. Select your printer from the list. If you would like to change the printer name listed, enter a new
name in the Printer Name field.
7. If you want other users on the network to access this printer, select Share this printer with other
computers on the network, and then enter a share name that users will easily identify.
8. If you want to set a printer as the default, select the printer and then click the Set this printer as
default check box.
9. If you want to restrict color printing, select the appropriate Color Track option. Enter the password.
10. Click Next.

Network Set-Up

.
Intro-21
or .
or .
Run, type D: \CDFE.exe (where D is the