Table of Contents
Advertisement
RRP3.21 STOPPER CST R (PL 3.2.32)
[Removal]
1)
Remove 250 SHEET PAPER TRAY. (RRP 2.1)
2)
Remove 250 SHEET FEEDER RIGHT COVER. (RRP 3.4)
3)
Remove 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
4)
Remove 250 SHEET FEEDER CHUTE ASSEMBLY. (RRP 3.3)
5)
Remove CLUTCH ASSY PH. (RRP 3.7)
6)
Remove DRIVE ASSY FEED 250. (RRP 3.5)
7)
Remove HOUSING ASSY FEED. (RRP 3.14)
8)
Remove CHUTE ASSY RETARD 250. (RRP 3.26)
9)
Remove GUIDE CST R 250 (RRP 3.22)
Be sure not to loose SPG LOCK CST LL when carrying out the work shown below.
10) Remove STOPPER CST R (PL 3.2.32) from GUIDE CST R 250 (PL 3.2.33).
[Replacement]
1)
Attach SPG LOCK CST LL (PL 3.2.31) to the boss of STOPPER CST R, and attach STOPPER
CST R to GUIDE CST R 250.
Check that SPG LOCK CST LL is engaged in the boss of STOPPER CST R and the boss
of GUIDE CST R 250.
2)
Attach GUIDE CST R 250. (RRP 3.22)
3)
Attach CHUTE ASSY RETARD 250. (RRP 3.26)
4)
Attach HOUSING ASSY FEED. (RRP 3.14)
5)
Attach DRIVE ASSY FEED 250. (RRP 3.5)
6)
Attach CLUTCH ASSY PH. (RRP 3.7)
7)
Attach 250 SHEET FEEDER CHUTE ASSEMBLY. (RRP 3.3)
8)
Attach 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
9)
Attach 250 SHEET FEEDER RIGHT COVER. (RRP 3.4)
10) Attach 250 SHEET PAPER TRAY. (RRP 2.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 105
Advertisement
Chapters
Table of Contents
