Table of Contents
Advertisement
RRP9.4
HOLDER ASSY-BIAS (PL 9.1.11)
[Removal]
1)
Remove COVER ASSY RH. (RRP 1.12)
2)
Remove WIRE ASSY DEVE (PL 9.1.14) connected to HOLDER ASSY-BIAS (PL 9.1.11).
3)
Release hook of HOLDER ASSY-BIAS to move it to bottom side of the main unit, match the
convex of HOLDER ASSY-BIAS to the notched of the main unit and remove HOLDER ASSY-
BIAS.
[Replacement]
1)
Match the convex of HOLDER ASSY-BIAS to the notched of the fitting hole in the main unit,
move HOLDER ASSY-BIAS upwards and fix it with a hook.
2)
Attach WIRE ASSY DEVE to HOLDER ASSY-BIAS.
3)
Attach COVER ASSY RH. (RRP 1.12)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 243
Advertisement
Chapters
Table of Contents
