Dell 3010CN Service Manual page 157

RRP2.4 COVER FRONT CST 250 (PL 2.1.13)
[Removal]
1) Remove 250 SHEET PAPER TRAY. (RRP 2.1)
2) Remove two screws (silver, with a flange, tap, 8mm) that fix COVER FRONT CST 250 (PL
2.1.13) to 250 SHEET PAPER TRAY (PL 2.1.1).
3) Relase a hook at the bottom of COVER FRONT CST 250 using a small screwdriver, lay
COVER FRONT CST 250 towards front, and then release the convex at three locatins on the
rear side of COVER FRONT CST 250 from the hole of 250 SHEET PAPER TRAY. Remove
COVER FRONT CST 250.
[Replacement]
1) Match the convex at three locatins on the rear side of COVER FRONT CST 250 to the hole of
250 SHEET PAPER TRAY, attach COVER FRONT CST 250. Fix a hook at the bottom of
COVER FRONT CST 250.
2) Fix COVER FRONT CST 250 on 250 SHEET PAPER TRAY using two screws (silver, with a
flange, tap, 8mm).
3) Attach 250 SHEET PAPER TRAY. (RRP 2.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 59