RRP12.2 ROTOR CONTROL BOARD (PL 12.1.2)
[Removal]
1)
Remove COVER ASSY RH. (RRP 1.12)
2)
Remove LEFT COVER. (RRP 1.10)
3)
Remove MULTIPURPOSE FEEDER COVER. (RRP 1.7)
4)
Remove LOWER FRONT COVER and COVER FRONT-U. (RRP 1.8)
5)
Remove connector (P/J430), connector (P/J432) and connector (P/J433) on ROTOR CONTROL
BOARD (PL 12.1.2).
6)
Remove four screws (silver, with a flange, 6mm) that fix ROTOR CONTROL BOARD to the
main unit.
7)
Remove ROTOR CONTROL BOARD from the main unit.
[Replacement]
1)
Attach ROTOR CONTROL BOARD to the main unit.
2)
Fix ROTOR CONTROL BOARD to the main unit using four screws (silver, with a flange,
6mm).
3)
Attach connector (P/J430), connector (P/J432) and connector (P/J433) on ROTOR CONTROL
BOARD.
4)
Attach LOWER FRONT COVER and COVER FRONT-U. (RRP 1.8)
5)
Attach MULTIPURPOSE FEEDER COVER. (RRP 1.7)
6)
Attach LEFT COVER. (RRP 1.10)
7)
Attach COVER ASSY RH. (RRP 1.12)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 279