Table of Contents
Advertisement
RRP1.1
TOP COVER (PL 1.1.1)
[Removal]
1)
Remove COVER ASSY RH. (RRP 1.12)
2)
Remove E ring on left hand side that is used to fix TOP COVER (PL 1.1.1) on the main unit.
3)
Slide the COVER ASSY to the right and remove it while TOP COVER is being opened.
[Replacement]
1)
Attach TOP COVER (PL 1.1.1) to the main unit in the open state.
When carrying out the work shown below, use the left one of the two slots in the stud.
2)
Fix the left side of TOP COVER using E ring.
3)
Attach COVER ASSY RH. (RRP 1.12)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 17
Advertisement
Chapters
Table of Contents
