Table of Contents
Advertisement
RRP3.7
CLUTCH ASSY PH (PL 3.2.5)
[Removal]
1)
Remove 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
2)
Release the two clamps that fix the harness of CLUTCH ASSY PH (PL3.2.5) and remove the
harness of CLUTCH ASSY PH.
3)
Remove connector (P/J609) of CLUTCH ASSY PH.
4)
Remove KL ring that fixes CLUTCH ASSY PH to 250 SHEET FEEDER ASSEMBLY.
5)
Remove CLUTCH ASSY PH from 250 SHEET FEEDER ASSEMBLY.
[Replacement]
1)
Match the hole position of CLUTCH ASSY PH to D-cut section of shaft of ROLL ASSY TURN
(PL 3.2.8), and attach CLUTCH ASSY PH in such a manner that convex of DRIVE ASSY
FEED 250 fits in the concave of CLUTCH ASSY PH.
2)
Fix CLUTCH ASSY PH to 250 SHEET FEEDER ASSEMBLY using KL ring.
3)
Attach connector (P/J609) of CLUTCH ASSY PH.
4)
Fix the harness of CLUTCH ASSY PH 250 using the two clamps.
5)
Attach 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 73
Advertisement
Chapters
Table of Contents
