Table of Contents
Advertisement
Sensor name (Diag. Code)
PH Door Switch (DI-52)
Sensor No paper (MPF)
(DI-53)
1)
Turn on the power and enter the Diagnostic Mode.
2)
Execute the DI-52.
3)
Open and close the Inner Rear Cover.
Operator Panel
4)
Press the "Cancel" key to stop the test.
1)
Turn on the power and enter the Diagnostic Mode.
2)
Open the Multipurpose Feeder Cover and remove the paper of the
MPF
3)
Execute the DI-53.
4)
Check the sensor.
Operator Panel
5)
Press the "Cancel" key to stop the test.
2 - 30
Chapter 2 Operation of Diag.
Confirmation procedure
PH Door Switch
Inner Rear Cover
Leg_Sec02_040FA
Actuator
Leg_Sec02_024FA
Advertisement
Chapters
Table of Contents
