Table of Contents
Advertisement
RRP14.12 HARNESS-ASSY FEED 1 (PL 14.3.6)
[Removal]
1)
Remove 500 SHEET FEEDER ASSEMBLY. (RRP 14.5)
2)
Remove 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
3)
Release two clamps that fixes the harness of HARNESS-ASSY FEED 1 (PL 14.3.6).
4)
Remove connector (P/J435) on PWBA-TRAY CONT (PL 14.3.12).
5)
Release the two hooks that fix HARNESS-ASSY FEED 1 to 500 SHEET FEEDER
ASSEMBLY, and remove HARNESS-ASSY FEED 1.
[Replacement]
1)
Put the connector (P/J435) of HARNESS-ASSY FEED 1 through the hole in 500 SHEET
FEEDER ASSEMBLY.
2)
Attach HARNESS-ASSY FEED 1 to 500 SHEET FEEDER ASSEMBLY and fix it using the
two hooks.
3)
Attach the connector (P/J435) on PWBA-TRAY CONT.
4)
Fix the harness of HARNESS-ASSY FEED 1 using two clamps.
5)
Attach 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
6)
Attach 500 SHEET FEEDER ASSEMBLY. (RRP 14.5)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 319
Advertisement
Chapters
Table of Contents
