Table of Contents
Advertisement
RRP3.26 CHUTE ASSY RETARD 250 (REFERENCE ONLY)
[Removal]
1)
Remove 250 SHEET PAPER TRAY. (RRP 2.1)
2)
Remove 250 SHEET FEEDER RIGHT COVER. (RRP 3.4)
3)
Remove 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
4)
Remove 250 SHEET FEEDER CHUTE ASSEMBLY. (RRP 3.3)
5)
Remove CLUTCH ASSY PH. (RRP 3.7)
6)
Remove DRIVE ASSY FEED 250. (RRP 3.5)
7)
Remove HOUSING ASSY FEED. (RRP 3.14)
8)
Remove two screws (silver, tap, 8mm) that fix CHUTE ASSY RETARD 250 to 250 SHEET
FEEDER ASSEMBLY.
9)
Remove a screw (silver, 6mm) that fix BRACKET MAG R (PL 3.2.46) to 250 SHEET FEEDER
ASSEMBLY.
10) Remove BRACKET MAG R from 250 SHEET FEEDER ASSEMBLY.
11) Remove the shaft of right side on CHUTE ASSY RETARD 250 from the bearing of GUIDE
CST R 250 (PL 3.2.33).
12) Remove the shaft of left side on CHUTE ASSY RETARD 250 from the bearing of GUIDE CST
L 250 (PL 3.2.34) and remove CHUTE ASSY RETARD 250 from 250 SHEET FEEDER
ASSEMBLY.
[Replacement]
1)
Attach the shaft of left side on CHUTE ASSY RETARD 250 to the bearing of GUIDE CST L
250 (PL 3.2.34).
2)
Attach the shaft of right side on CHUTE ASSY RETARD 250 to the bearing of GUIDE CST R
250 (PL 3.2.33) and attach CHUTE ASSY RETARD 250 to 250 SHEET FEEDER ASSEMBLY.
3)
Put BRACKET MAG R (PL 3.2.46) in the notched of 250 SHEET FEEDER ASSEMBLY,
match the hole of BRACKET MAG R to the boss of 250 SHEET FEEDER ASSEMBLY and
attach BRACKET MAG R.
4)
Fix BRACKET MAG R to 250 SHEET FEEDER ASSEMBLY using a screw (silver, 6mm).
5)
Fix CHUTE ASSY RETARD 250 to 250 SHEET FEEDER ASSEMBLY using two screws
(silver, tap, 8mm).
6)
Attach HOUSING ASSY FEED. (RRP 3.14)
7)
Attach DRIVE ASSY FEED 250. (RRP 3.5)
8)
Attach CLUTCH ASSY PH. (RRP 3.7)
9)
Attach 250 SHEET FEEDER CHUTE ASSEMBLY. (RRP 3.3)
10) Attach 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
11) Attach 250 SHEET FEEDER RIGHT COVER. (RRP 3.4)
12) Attach 250 SHEET PAPER TRAY. (RRP 2.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 116
Advertisement
Chapters
Table of Contents
