Table of Contents
Advertisement
RRP1.17 COVER TOP SIDE R (PL 1.1.32)
[Removal]
1)
Remove FUSER COVER. (RRP 1.4)
2)
Open COVER FRONT-U (PL 1.1.14).
3)
Open TOP COVER (PL 1.1.1).
4)
Remove a screw (silver, with flange, 8mm) that fixes the COVER TOP SIDE R (PL1.1.33) and
the BRACKET COVER TOP A RH (PL1.1.37) to the printer.
5)
Remove the COVER TOP SIDE R and BRACKET COVER TOP A RH from the printer.
[Replacement]
1)
Match the holes of the COVER TOP SIDE R and BRACKET COVER TOP A RH to the boss of
the printer.
2)
Fix the COVER TOP SIDE R
TOP A RH to the printer using a screw (silver, with flange, 8mm).
3)
Close TOP COVER (PL 1.1.1).
4)
Close COVER FRONT-U (PL 1.1.14).
5)
Attach FUSER COVER. (RRP 1.4)
Chapter 3 Removal and Replacement Procedures (RRPs)
BRACKET COVER TOP A RH and the BRACKET COVER
3 - 49
Advertisement
Chapters
Table of Contents
