Dell 3010CN Service Manual page 228

Hide thumbs Also See for 3010CN:
Table of Contents

Advertisement

RRP4.4
SIDE GUIDE GEAR (PL4.1.9), LEFT SIDE GUIDE (PL 4.1.10), RIGHT SIDE
GUIDE (PL 4.1.11)
[Removal]
1)
Open MULTIPURPOSE FEEDER COVER (PL 1.1.12).
2)
Release the hook that fix center hole of GUIDE SIDE COVER (PL 4.1.8), release the hooks at
right and left of GUIDE SIDE COVER (PL 4.1.8) from the holes in FRAME ASSY BOTTOM
(PL 4.1.18) and remove GUIDE SIDE COVER.
3)
Remove SIDE GUIDE GEAR (PL 4.1.9) from FRAME ASSY BOTTOM.
4)
Move LEFT SIDE GUIDE (PL 4.1.10) to right side, release convex of LEFT SIDE GUIDE from
fitting part of FRAME ASSY BOTTOM and remove LEFT SIDE GUIDE.
5)
Move RIGHT SIDE GUIDE (PL 4.1.11) to left side, remove convex of RIGHT SIDE GUIDE
from fitting part of FRAME ASSY BOTTOM and remove RIGHT SIDE GUIDE.
[Replacement]
1)
Match the convex of RIGHT SIDE GUIDE to the fitting part of FRAME ASSY BOTTOM, place
the tension section of RIGHT SIDE GUIDE in the groove of FRAME ASSY BOTTOM, it is a
knob about the lever of RIGHT SIDE GUIDE and move RIGHT SIDE GUIDE to right side and
attach it.
2)
Match the convex of LEFT SIDE GUIDE to the fitting part of FRAME ASSY BOTTOM, place
the tension of LEFT SIDE GUIDE in the groove of FRAME ASSY BOTTOM, and move LEFT
SIDE GUIDE to left side and attach it.
3)
Open RIGHT SIDE GUIDE and LEFT SIDE GUIDE to max., attach SIDE GUIDE GEAR to
FRAME ASSY BOTTOM and fix it.
4)
Attach GUIDE SIDE COVER to FRAME ASSY BOTTOM and fix it using the hooks at right
and left of GUIDE SIDE COVER, fix center hole of GUIDE SIDE COVER to FRAME ASSY
BOTTOM using a hook at FRAME ASSY BOTTOM.
5)
Close MULTIPURPOSE FEEDER COVER.
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 130

Advertisement

Table of Contents
loading

Table of Contents