Dell 3010CN Service Manual page 431

RRP14.19 PHOTO SENSOR: NO PAPER (PL 14.4.4)
[Removal]
1) Remove 500 SHEET PAPER TRAY. (RRP 14.1)
2) Remove 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
3) Remove CLUTCH ASSY PH. (RRP 14.11)
4) Remove DRIVE ASSY FEED. (RRP 14.9)
5) Remove HOUSING ASSY FEED. (RRP 14.18)
6) Remove two screws (silver, tap, 8mm) that fix COVER FEED (PL 14.4.13) to HOUSING ASSY
FEED.
7) Remove COVER FEED from HOUSING ASSY FEED.
8) Release the hooks at three locations that fix PHOTO SENSOR:NO PAPER (PL 14.4.4) to
HOUSING ASSY FEED and remove PHOTO SENSOR:NO PAPER.
9) Remove connector (P/J119) of PHOTO SENSOR:NO PAPER.
[Replacement]
When carrying out the work shown below, carefully check the relation between PHOTO
SENSOR: NO PAPER and ACTUATOR NO PAPER CST.
1) Attach connector (P/J119) of PHOTO SENSOR:NO PAPER.
2) Put ACTUATOR NO PAPER CST to the sensor part of PHOTO SENSOR: NO PAPER, match
three hooks of PHOTO SENSOR:NO PAPER to the fitting position of HOUSING ASSY FEED
and attach it.
3) Attach COVER FEED on HOUSING ASSY FEED.
4) Fix COVER FEED on HOUSING ASSY FEED using two screws (silver, tap, 8mm).
5) Attach HOUSING ASSY FEED. (RRP 14.18)
6) Attach DRIVE ASSY FEED. (RRP 14.9)
7) Attach CLUTCH ASSY PH. (RRP 14.11)
8) Attach 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
9) Attach 500 SHEET PAPER TRAY. (RRP 14.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 333