Table of Contents
Advertisement
RRP3.16 ACTUATOR NO PAPER CST (PL 3.3.5)
[Removal]
1)
Remove 250 SHEET PAPER TRAY. (RRP 2.1)
2)
Remove 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
3)
Remove CLUTCH ASSY PH. (RRP 3.7)
4)
Remove DRIVE ASSY FEED 250. (RRP 3.5)
5)
Remove HOUSING ASSY FEED. (RRP 3.14)
6)
Release the three hooks that fix CAP ACTUATOR (PL 3.3.3) to HOUSING ASSY FEED (PL
3.3.1), remove CAP ACTUATOR.
7)
Remove the two screws (silver, tap, 8mm) that fix COVER FEED (PL 3.3.13) to HOUSING
ASSY FEED.
8)
Remove COVER FEED from HOUSING ASSY FEED.
9)
Pull out the shaft of ACTUATOR NO PAPER CST (PL 3.3.5) from a hook of HOUSING ASSY
FEED, slide it along with notched of HOUSING ASSY FEED, and remove ACTUATOR NO
PAPER CST.
[Replacement]
When carrying out the work shown below, carefully check the relation between PHOTO
SENSOR: NO PAPER and ACTUATOR-NO PAPER CST.
1)
Insert the shaft of ACTUATOR NO PAPER CST (PL 3.3.5) in the notched of HOUSING ASSY
FEED (PL 3.3.1).
2)
Insert ACTUATOR NO PAPER CST in SENOR PHOTE: NO PAPER, engage the shaft of
ACTUATOR NO PAPER CST with a hook of HOUSING ASSY FEED and attach it.
3)
Attach COVER FEED (PL 3.3.13) to HOUSING ASSY FEED.
4)
Fix COVER FEED to HOUSING ASSY FEED using two screws (silver, tap, 8mm).
5)
Match the hole of CAP ACTUATOR (PL 3.3.3) to the boss of HOUSING ASSY FEED and
attach CAP ACTUATOR.
6)
Attach HOUSING ASSY FEED. (RRP 3.14)
7)
Attach DRIVE ASSY FEED 250. (RRP 3.5)
8)
Attach CLUTCH ASSY PH. (RRP 3.7)
9)
Attach 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
10) Attach 250 SHEET PAPER TRAY. (RRP 2.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 92
Advertisement
Chapters
Table of Contents
