Table of Contents
Advertisement
RRP3.9
ROLL ASSY TURN (PL 3.2.8)
[Removal]
1)
Remove 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
2)
Remove 250 SHEET FEEDER RIGHT COVER. (RRP 3.4)
3)
Remove 250 SHEET FEEDER CHUTE ASSEMBLY. (RRP 3.3)
4)
Remove CLUTCH ASSY PH. (RRP 3.7)
5)
Remove DRIVE ASSY FEED 250. (RRP 3.5)
6)
Remove HOUSING ASSY FEED. (RRP 3.14)
7)
Remove CHUTE ASSY RETARD 250. (RRP 3.26)
8)
Remove the E rings that fix both sides of the shaft of ROLL ASSY TURN (PL 3.2.8) from 250
SHEET FEEDER ASSEMBLY.
9)
Remove left and right BEARING EARTH (PL 3.2.7) that fix ROLL ASSY TURN and remove
BEARING EARTH from the 250 SHEET FEEDER ASSEMBLY.
10) First slide ROLL ASSY TURN to the left, and remove ROLL ASSY TURN by pulling out the
shaft of ROLL ASSY TURN from the right side bearing of 250 SHEET FEEDER ASSEMBLY.
[Replacement]
1)
After placing the left side of the shaft of ROLL ASSY TURN inside the left side bearing of 250
SHEET FEEDER ASSEMBLY, slide ROLL ASSY TURN to the right and attach.
2)
Match the double D-CUT face of 250 SHEET FEEDER ASSEMBLY on the shaft of 250
SHEET FEEDER ASSEMBLY. Attach BEARING EARTH and fix ROLL ASSY TURN.
3)
Fix both sides of the shaft of ROLL ASSY TURN to 250 SHEET FEEDER ASSEMBLY using
the E rings.
4)
Attach CHUTE ASSY RETARD 250. (RRP 3.26)
5)
Attach HOUSING ASSY FEED. (RRP 3.14)
6)
Attach DRIVE ASSY FEED 250. (RRP 3.5)
7)
Attach CLUTCH ASSY PH. (RRP 3.7)
8)
Attach 250 SHEET FEEDER CHUTE ASSEMBLY. (RRP 3.3)
9)
Attach 250 SHEET FEEDER RIGHT COVER. (RRP 3.4)
10) Attach 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 77
Advertisement
Chapters
Table of Contents
