Table of Contents
Advertisement
RRP1.6
RIGHT COVER (PL 1.1.8), COVER ROS WINDOW (PL 1.1.20), SLIDE BAR (PL
1.1.21)
[Removal]
1)
Remove COVER ASSY RH. (RRP 1.12)
2)
Release the hooks at four locations that fix GUIDE BAR (PL 1.1.22) to RIGHT COVER (PL
1.1.8), and remove GUIDE BAR.
3)
Remove a screw (Silver, with a flange, tap, 8mm) that fix COVER ROS WINDOW (PL 1.1.20)
on SLIDE BAR (PL 1.1.21).
4)
Slide COVER ROS WINDOW along the rib of RIGHT COVER, and remove COVER ROS
WINDOW from the convexed section of RIGHT COVER.
5)
Remove SLIDE BAR from RIGHT COVER.
[Replacement]
1)
Attach SLIDE BAR at the concaved section on the rear side of RIGHT COVER.
When carrying out the work shown below, make sure that the top and the bottom of
COVER ROS WINDOW fit the convexed section of RIGHT COVER.
2)
Align COVER ROS WINDOW to its installation location on the rear side of RIGHT COVER,
slide COVER ROS WINDOW along the rib of RIGHT COVER, then attach COVER ROS
WINDOW to SLIDE BAR.
3)
Fix COVER ROS WINDOW on SLIDE BAR using a screw (Silver, with a flange, tap, 8mm).
4)
Align the hole of GUIDE BAR to the boss of RIGHT COVER, and fix GUIDE BAR using the
hooks at four locations.
When the above steps have been completed, move SLIDE BAR and see if COVER ROS
WINDOW opens and closes smoothly.
5)
Attach COVER ASSY RH. (RRP 1.12)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 27
Advertisement
Chapters
Table of Contents
