Table of Contents
Advertisement
RRP5.14 GEAR ASSY DRIVE (PL 5.2.24)
[Removal]
1)
Remove VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)
2)
Remove MOTOR-PH. (RRP 5.11)
3)
Release the clamp on GEAR ASSY DRIVE (PL 5.2.24), and remove the harness.
4)
Remove the two screws (silver, with a flange, tap, 8mm) that fix GEAR ASSY DRIVE to
VERTICAL TRANSPORT ASSEMBLY (PL 5.2.1).
5)
Remove GEAR ASSY DRIVE from VERTICAL TRANSPORT ASSEMBLY.
[Replacement]
1)
Match the hole in GEAR ASSY DRIVE to the boss of VERTICAL TRANSPORT ASSEMBLY,
and attach GEAR ASSY DRIVE.
2)
Fix GEAR ASSY DRIVE to VERTICAL TRANSPORT ASSEMBLY using the two screws
(silver, with a flange, tap, 8mm).
3)
Fix the harness to GEAR ASSY DRIVE using a clamp.
4)
Attach MOTOR-PH. (RRP 5.11)
5)
Attach FRAME-ASSY-PH. (RRP 5.3)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 185
Advertisement
Chapters
Table of Contents
