Clutch and Solenoid name
(Diag. Code)
Tray 1 Motor Start (DO-
e0)
NOTE: Tray 1 Motor is in the 250 sheets Option Tray. Before
executing the test, remove the left side cover of the paper
tray.
1)
Turn on the power and enter the Diagnostic Mode.
2)
Execute the DO-e0 and confirm the motor rotation. (Customer
can confirm the noise only.)
3)
Press the "Cancel" key to stop the motor.
2 - 64
Chapter 2 Operation of Diag.
Confirmation procedure
Tray 1 Motor
Leg_Sec02_069FA