Table of Contents
Advertisement
RRP4.8
SOLENOID PICK UP (PL 4.1.20)
[Removal]
1)
Remove COVER ASSY RH. (RRP 1.12)
2)
Remove LEFT COVER. (RRP 1.10)
3)
Remove MULTIPURPOSE FEEDER COVER. (RRP 1.7)
4)
Remove LOWER FRONT COVER and COVER FRONT-U. (RRP 1.8)
5)
Remove VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)
6)
Remove MULTIPURPOSE FEEDER ASSEMBLY. (RRP 4.1)
7)
Release the hook of GEAR PICK UP (PL 4.1.19) that fixes SHAFT ASSY MSI (PL 4.1.4) to
MULTIPURPOSE FEEDER ASSEMBLY (PL 4.1.1) and remove GEAR PICK UP.
When carrying out the work shown below, leave the relay connector on the harness side.
8)
Remove connector (P/J605) of SOLENOID PICK UP (PL 4.1.20) and remove harness from
groove in MULTIPURPOSE FEEDER ASSEMBLY.
9)
Remove a screw (silver, tap, 8mm) that fixes SOLENOID PICK UP to MULTIPURPOSE
FEEDER ASSEMBLY.
10) Remove SOLENOID PICK UP from MULTIPURPOSE FEEDER ASSEMBLY.
[Replacement]
1)
Match the hole of SOLENOID PICK UP to the boss of MULTIPURPOSE FEEDER
ASSEMBLY and attach SOLENOID PICK UP.
2)
Fix SOLENOID PICK UP to MULTIPURPOSE FEEDER ASSEMBLY using a screw (silver,
tap, 8mm).
3)
Attach connector (P/J605) of SOLENOID PICK UP and lay harness to the groove of
MULTIPURPOSE FEEDER ASSEMBLY.
4)
Attach GEAR PICK UP to SHAFT ASSY MSI and match the hook of GEAR PICK UP to the
groove of SHAFT ASSY MSI.
5)
Attach MULTIPURPOSE FEEDER ASSEMBLY. (RRP 4.1)
6)
Attach VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)
7)
Attach LOWER FRONT COVER and COVER FRONT-U. (RRP 1.8)
8)
Attach MULTIPURPOSE FEEDER COVER. (RRP 1.7)
9)
Attach LEFT COVER. (RRP 1.10)
10) Attach COVER ASSY RH. (RRP 1.12)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 143
Advertisement
Chapters
Table of Contents
