Table of Contents
Advertisement
RRP12.9 FUSER CONTROLLER BOARD (PL 12.2.10)
[Removal]
1)
Remove LEFT COVER. (RRP 1.10)
2)
Remove CHASSIS ASSY ESS. (RRP 12.10)
3)
Remove all connectors on FUSER CONTROLLER BOARD (PL 12.2.10).
4)
Remove two screws (silver, with a flange, 8mm) that fix FUSER CONTROLLER BOARD to
the main unit.
5)
Remove a screw (silver, with a washer, 5mm) that fixes FUSER CONTROLLER BOARD to
the main unit.
6)
Remove FUSER CONTROLLER BOARD from the main unit.
[Replacement]
1)
Match the boss part and convex of FUSER CONTROLLER BOARD to holes in main unit and
attach FUSER CONTROLLER BOARD.
2)
Fix FUSER CONTROLLER BOARD to the main unit using a screw (silver, with a washer,
5mm).
3)
Fix FUSER CONTROLLER BOARD to the main unit using two screws (silver, with a flange,
8mm).
4)
Attach all connectors on FUSER CONTROLLER BOARD.
5)
Attach CHASSIS ASSY ESS. (RRP 12.10)
6)
Attach LEFT COVER. (RRP 1.10)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 291
Advertisement
Chapters
Table of Contents
