Table of Contents
Advertisement
RRP14.15 PWBA MOT (PL 14.3.11)
[Removal]
1)
Remove 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
2)
Remove the connector (P/J440) and the connector (P/J446) on PWBA MOT (PL 14.3.11).
3)
Remove the three screws (silver, with a flange, 6mm) that fix PWBA MOT to 500 SHEET
FEEDER ASSEMBLY.
4)
Remove PWBA MOT from 500 SHEET FEEDER ASSEMBLY.
[Replacement]
1)
Align the lower right side notch of PWBA MOT to the convexed section of 500 PAPER FEEDR
ASSY and attach it.
2)
Fix PWBA MOT to 500 SHEET FEEDER ASSEMBLY using the three screws (silver, with a
flange, 6mm).
3)
Attach the connector (P/J440) and the connector (P/J446) on PWBA MOT.
4)
Attach 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 325
Advertisement
Chapters
Table of Contents
