RRP12.3 SENSOR ASSY (PL 12.1.3)
[Removal]
1)
Remove COVER ASSY RH. (RRP 1.12)
2)
Remove connector (P/J104) on SENSOR ASSY (PL 12.1.3).
3)
Remove a screw (silver, with a flange, tap, 8mm) that fixes SENSOR ASSY to the main unit.
4)
Remove SENSOR ASSY from the main unit.
[Replacement]
1)
Attach SENSOR ASSY to the main unit.
2)
Fix SENSOR ASSY to the main unit using a screw (silver, with a flange, tap, 8mm).
3)
Attach connector (P/J104) on SENSOR ASSY.
4)
Attach COVER ASSY RH. (RRP 1.12)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 281