Table of Contents
Advertisement
RRP5.9
ACTUATOR-REGI (PL 5.2.18)
[Removal]
1)
Remove VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)
2)
Remove left side shaft of ACTUATOR-REGI (PL 5.2.18) from hook of VERTICAL
TRANSPORT ASSEMBLY (PL 5.2.1).
3)
Pull out the right shaft of ACTUATOR-REGI from the hole in VERTICAL TRANSPORT
ASSEMBLY, and remove ACTUATOR-REGI together with SPRING-ACTUATOR (PL 5.2.17).
4)
Remove SPRING-ACTUATOR from ACTUATOR-REGI.
[Replacement]
1)
Attach SPRING-ACTUATOR to ACTUATOR-REGI.
2)
Place the right shaft of ACTUATOR-REGI in the hole of VERTICAL TRANSPORT
ASSEMBLY, and hook SPRING-ACTUATOR on the notched of VERTICAL TRANSPORT
ASSEMBLY.
SPRING-ACTUATOR should be hooked on ACTUATOR-REGI and VERTICAL
TRANSPORT ASSEMBLY properly.
3)
Fix the left side shaft of ACTUATOR-REGI using the hook of VERTICAL TRANSPORT
ASSEMBLY.
4)
Attach FRAME-ASSY-PH. (RRP 5.3)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 175
Advertisement
Chapters
Table of Contents
