Table of Contents
Advertisement
RRP3.15 PHOTO SENSOR: NO PAPER (PL 3.3.4)
[Removal]
1)
Remove 250 SHEET PAPER TRAY. (RRP 2.1)
2)
Remove 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
3)
Remove CLUTCH ASSY PH. (RRP 3.7)
4)
Remove DRIVE ASSY FEED 250. (RRP 3.5)
5)
Remove HOUSING ASSY FEED. (RRP 3.14)
6)
Remove two screws (silver, tap, 8mm) that fix COVER FEED (PL 3.3.13) to HOUSING ASSY
FEED.
7)
Remove COVER FEED from HOUSING ASSY FEED.
8)
Release the three hooks that fix PHOTO SENSOR: NO PAPER (PL 3.3.4) to HOUSING ASSY
FEED, and remove PHOTO SENSOR: NO PAPER.
9)
Remove connector (P/J119) of PHOTO SENSOR: NO PAPER.
[Replacement]
When carrying out the work shown below, carefully check the relation between PHOTO
SENSOR: NO PAPER and ACTUATOR-NO PAPER CST.
1)
Attach connector (P/J119) of PHOTO SENSOR: NO PAPER.
2)
Insert ACTUATOR NO PAPER CST to PHOTO SENSOR: NO PAPER and match the hook of
PHOTO SENSOR: NO PAPER to the installation position. Attach it to HOUSING ASSY
FEED.
3)
Attach COVER FEED to HOUSING ASSY FEED.
4)
Fix COVER FEED to HOUSING ASSY FEED using two screws (silver, tap, 8mm).
5)
Attach HOUSING ASSY FEED. (RRP 3.14)
6)
Attach DRIVE ASSY FEED 250. (RRP 3.5)
7)
Attach CLUTCH ASSY PH. (RRP 3.7)
8)
Attach 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
9)
Attach 250 PAPER CASSETTE ASY. (RRP 2.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 89
Advertisement
Chapters
Table of Contents
