Exiting Digital Output (Do) Test - Dell 3010CN Service Manual

Code(HEX)
DB
DC
E0
E8

4.3.7 Exiting Digital Output (DO) Test

1) Press the "Cancel" key to stop the DO Test.
2) Press the "Menu" key and the "Cancel" key to exit the DO Test mode. ("IOT Diag." is
displayed.)
It is a procedure for shifting from Diag. mode to the normal mode as follows.
3) Press the "
4) Press the "
Code_DO
Tray1 solenoid
Tray2 solenoid
Tray1 motor
Tray2 motor
" key twice to display the "Complete"
" key three times to exit the Diag mode.
Menu No.
DO-db
DO-dc
DO-e0
DO-e8
2 - 45
Chapter 2 Operation of Diag.