Table of Contents
Advertisement
RRP14.26 GUIDE CST L (PL 14.3.30)
[Removal]
1)
Remove 500 SHEET PAPER TRAY. (RRP 14.1)
2)
Remove 500 SHEET FEEDER RIGHT COVER. (RRP 14.8)
3)
Remove 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
4)
Remove 500 SHEET FEEDER CHUTE ASSEMBLY. (RRP 14.7)
5)
Remove CLUTCH ASSY PH. (RRP 14.11)
6)
Remove DRIVE ASSY FEED. (RRP 14.9)
7)
Remove HOUSING ASSY FEED. (RRP 14.18)
8)
Remove CHUTE ASSY RETARD. (RRP 14.29)
9)
Remove a screw (silver, tap, 8mm) that fix CAP (PL 14.3.40) to 500 SHEET FEEDER
ASSEMBLY.
10) Remove CAP from 500 SHEET FEEDER ASSEMBLY.
11) Remove five screws (silver, tap, 6mm) that fix GUIDE CST L (PL 14.3.30) to 500 SHEET
FEEDER ASSEMBLY.
12) Move GUIDE CST L to right direction a little to remove from FUSER CHUTE INTERLOCK
(PL 14.3.9), remove GUIDE CST L from 500 SHEET FEEDER ASSEMBLY together with SPG
LOCK CST LL (PL 14.3.33) and STOPPER CST L (PL 14.3.32).
13) Remove STOPPER CST L. (RRP 14.28)
[Replacement]
1)
Attach STOPPER CST L. (RRP 14.28)
2)
Put FUSER CHUTE INTERLOCK in the rear side hole of GUIDE CST L, match the boss of
GUIDE CST L to the hole of 500 SHEET FEEDER ASSEMBLY, attach GUIDE CST L.
3)
Fix GUIDE CST L on 500 SHEET FEEDER ASSEMBLY using five screws (silver, tap, 6mm).
4)
Match the boss of CAP to the hole of 500 SHEET FEEDER ASSEMBLY and attach it.
5)
Fix CAP to 500 SHEET FEEDER ASSEMBLY using a screw (silver, tap, 8mm).
6)
Attach CHUTE ASSY RETARD. (RRP 14.29)
7)
Attach HOUSING ASSY FEED. (RRP 14.18)
8)
Attach DRIVE ASSY FEED. (RRP 14.9)
9)
Attach CLUTCH ASSY PH. (RRP 14.11)
10) Attach 500 SHEET FEEDER CHUTE ASSEMBLY. (RRP 14.7)
11) Attach 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
12) Attach 500 SHEET FEEDER RIGHT COVER. (RRP 14.8)
13) Attach 500 SHEET PAPER TRAY. (RRP 14.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 351
Advertisement
Chapters
Table of Contents
