Rrp3.1 250 Sheet Feeder Assembly (Pl) - Dell 3010CN Service Manual

Hide thumbs Also See for 3010CN:
Table of Contents

Advertisement

RRP3.1
250 SHEET FEEDER ASSEMBLY (PL 3.1.15)
[Removal]
1)
Remove 250 SHEET PAPER TRAY. (RRP 2.1)
2)
Turn the LOCK MC TO FDR (PL 3.1.17) on both the right and left sides clockwise by 90
degrees to unlock it from the main unit.
3)
Lifting up the main unit at the recess on the lower section of both the right and left sides,
remove the main unit from the 250 SHEET FEEDER ASSEMBLY (PL 3.1.15).
[Replacement]
When carrying out the following work, make sure that the oval section (that fits in the
mounting hole in the printer) on the top of LOCK MC TO FDR is positioned in such a way
that its long sides extend laterally.
1)
Aligning the mounting holes in the main unit with three bosses on the 250 SHEET FEEDER
ASSEMBLY, install the main unit on the 250 SHEET FEEDER ASSEMBLY.
2)
Turn the LOCK MC TO FDR (PL 3.1.17) on both the right and left sides counterclockwise by
90 degrees to securely lock the main unit on the 250 SHEET FEEDER ASSEMBLY.
3)
Attach 250 SHEET PAPER TRAY. (RRP 2.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 61

Advertisement

Table of Contents
loading

Table of Contents