Table of Contents
Advertisement
RRP5.1
REAR CHUTE ASSEMBLY (PL 5.1.2)
[Removal]
1)
Open REAR CHUTE ASSEMBLY (PL 5.1.2).
Try not to break the boss of REAR CHUTE ASSEMBLY when carrying out the work
shown below.
2)
Depress the fitting part of the right side on REAR CHUTE ASSEMBLY using the mini
screwdriver, remove the boss of the right side from the hole of FRAME-PH (PL 5.2.10) and
remove REAR CHUTE ASSEMBLY.
[Replacement]
Try not to break the boss of REAR CHUTE ASSEMBLY when carrying out the work
shown below.
1)
Put the boss of the left side on REAR CHUTE ASSEMBLY (PL 5.1.2) in the hole of left side on
FRAME-PH (PL 5.2.10), slide the boss of the right side of REAR CHUTE ASSEMBLY
diagonally to the hole of right side of FRAME-PH and attach REAR CHUTE ASSEMBLY
2)
Close REAR CHUTE ASSEMBLY.
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 157
Advertisement
Chapters
Table of Contents
