Table of Contents
Advertisement
RRP2.2
GUIDE END ASSY 250 (PL 2.1.2)
[Removal]
1)
Remove 250 SHEET PAPER TRAY. (RRP 2.1)
2)
Remove PLATE ASSY BOTTOM 250. (RRP 2.3)
3)
Slide GUIDE END ASSY 250 (PL 2.1.2) to rear side, match the convex at four locations on
GUIDE END ASSY 250 to the notched of CASSETTE 250 (PL 2.1.12) and remove it upwards.
[Replacement]
1)
Match the convex at four locations on GUIDE END ASSY 250 to the notched of CASSETTE
250 and attach it.
2)
Slide GUIDE END ASSY 250 to front side and insert the convex of GUIDE END ASSY 250 in
the groove of PLATE SLIDE 250 (PL 2.1.14).
3)
Attach PLATE ASSY BOTTOM 250. (RRP 2.3)
4)
Attach 250 PAPER CASETTE ASSY. (RRP 2.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 53
Advertisement
Chapters
Table of Contents
