Table of Contents
Advertisement
Clutch and Solenoid name
(Diag. Code)
2nd BTR Retract Motor
(DO-14)
NOTE: This procedure is for the technical staff. The
customer's procedure is the 1, 5 and 6.
1)
Turn on the power and enter the Diagnostic Mode.
2)
Open the Front door and the Top Cover and then remove the IBT.
3)
Cheat the safety Interlock System.
4)
Execute the DO-12 and confirm the moving of 2nd BTR. (The
customer can confirm the motor noise only.)
5)
Press the "Cancel" key to stop test.
6)
Remove the cheater and reseat the IBT.
7)
Close the Top Cover and the Front Door.
2 - 50
Chapter 2 Operation of Diag.
Confirmation procedure
2nd BTR
Leg_Sec02_053FA
Advertisement
Chapters
Table of Contents
