Table of Contents
Advertisement
RRP11.7 BIAS TRANSFER ROLLER(BTR) RETRACTOR MOTOR (PL 11.1.7)
[Removal]
1)
Remove LEFT COVER. (RRP 1.10)
2)
Release the clamps that fixes the harness of BIAS TRANSFER ROLLER(BTR) RETRACTOR
MOTOR.
3)
Remove the connector (P/J600) of BIAS TRANSFER ROLLER(BTR) RETRACTOR MOTOR
(PL 11.1.7).
4)
Remove the two screws (silver, with a flange, 4mm) that fix BIAS TRANSFER ROLLER(BTR)
RETRACTOR MOTOR to the main unit.
5)
Remove BIAS TRANSFER ROLLER(BTR) RETRACTOR MOTOR from the main unit.
[Replacement]
Pay attention setting direction of BIAS TRANSFER ROLLER(BTR) RETRACTOR
MOTOR when carrying out the work shown below.
1)
Attach BIAS TRANSFER ROLLER(BTR) RETRACTOR MOTOR to the main unit so that the
harness of BIAS TRANSFER ROLLER(BTR) RETRACTOR MOTOR is directed rearward.
2)
Fix BIAS TRANSFER ROLLER(BTR) RETRACTOR MOTOR to the main unit using two
screws (silver, with a flange, 4mm).
3)
Attach the connector (P/J600) of BIAS TRANSFER ROLLER(BTR) RETRACTOR MOTOR.
4)
Fix the harness of BIAS TRANSFER ROLLER(BTR) RETRACTOR MOTOR with the clamp.
5)
Attach LEFT COVER. (RRP 1.10)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 275
Advertisement
Chapters
Table of Contents
