Table of Contents
Advertisement
RRP7.1
IBT SENSOR (PL 7.1.2)
[Removal]
1)
Open COVER FRONT-U (PL 1.1.14).
2)
Open TOP COVER (PL 1.1.1).
3)
Remove IBT (PL 7.1.1).
4)
Remove a screw (silver, with a flange, 10mm) that fixes IBT SENSOR (PL 7.1.2) to PLATE-
TR-0 (PL 7.1.3).
5)
Remove IBT SENSOR from PLATE-TR-0.
6)
Remove connector (P/J108) of IBT SENSOR (PL 7.1.2).
[Replacement]
1)
Attach connector (P/J108) of IBT SENSOR.
2)
Match the hole in IBT SENSOR to the boss of PLATE-TR-0 and attach IBT SENSOR.
3)
Fix IBT SENSOR to PLATE-TR-0 using a screw (silver, with a flange, 10mm).
4)
Attach IBT.
5)
Close TOP COVER.
6)
Close COVER FRONT-U.
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 213
Advertisement
Chapters
Table of Contents
