Table of Contents
Advertisement
RRP5.7
ROLL ASSY-PRE REGI (PL 5.2.12)
[Removal]
1)
Remove VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)
2)
Remove REAR CHUTE ASSEMBLY. (RRP 5.1)
3)
Remove MOTOR-PH. (RRP 5.11)
4)
Remove GEAR ASSY DRIVE. (RRP 5.14)
5)
Remove CLUTCH ASSY PH: PRE REGI. (RRP 5.12)
6)
Remove E ring that fixes the right side of shaft of ROLL ASSY-PRE REGI (PL 5.2.12) from
VERTICAL TRANSPORT ASSEMBLY (PL 5.2.1).
7)
Remove right and left BEARING METALs (PL 5.2.3) that fix ROLL ASSY-PRE REGI from
VERTICAL TRANSPORT ASSEMBLY.
8)
Move ROLL ASSY-PRE REGI to left side once, and then pull out the shaft of ROLL ASSY-
PRE REGI from right side bearing of VERTICAL TRANSPORT ASSEMBLY and remove
ROLL ASSY-PRE REGI.
[Replacement]
1)
After inserting the left side shaft of ROLL ASSY-PRE REGI in the left side bearing of
VERTICAL TRANSPORT ASSEMBLY, move ROLL ASSY-PRE REGI to right side and attach
it.
2)
Match the double D-cut section of BEARING METAL to the right and left sides bearing of
VERTICAL TRANSPORT ASSEMBLY, attach BEARING METAL and fix ROLL ASSY-PRE
REGI.
3)
Fix right side shaft of ROLL ASSY-PRE REGI using E ring.
4)
Attach CLUTCH ASSY PH: PRE REGI. (RRP 5.12)
5)
Attach GEAR ASSY DRIVE. (RRP 5.14)
6)
Attach MOTOR-PH. (RRP 5.11)
7)
Attach REAR CHUTE ASSEMBLY. (RRP 5.1)
8)
Attach FRAME-ASSY-PH. (RRP 5.3)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 171
Advertisement
Chapters
Table of Contents
