Exiting Digital Input (Di) Test; How To Check Sensors And Switches - Dell 3010CN Service Manual

4.3.3 Exiting Digital Input (DI) Test

1) Press "Cancel" key to stop the DI Test.
2) Press "Menu" key and "Cancel" key to exit DI Test mode. ("IOT Diag." is displayed.)
It is a procedure for shifting from Diag. mode to the normal mode as follows.
3) Press " " key twice to display "Complete"
4) Press " " key three times to exit Diag.mode.

4.3.4 How to check sensors and switches

-Parts Location
Fuser Door Switch
[DI-15]
Interlock 24VDC (Fuser)
[DI-e]
PH Door Switch
[DI-52]
TR0 (IBT Rotation)
Sensor
[DI-42]
Sensor IBT Retract
[DI-9]
DEVE Rotary Home
Position Sensor
[DI-6c]
Sensor No paper (MPF)
[DI-53]
Tray 1 Cassette Exist
Switch
[DI-f5]
Tray 1 Cassette Select
Switch
[DI-f6]
Tray 2 Cassette Exist
Switch
[DI-fd]
Tray 2 Cassette Select
Switch
[DI-fe]
2nd BTR Cover Switch
[DI-19]
Sensor 2nd BTR Retract
[DI-8]
2 - 20
Chapter 2 Operation of Diag.
Fuser Exit Sensor
[DI-56]
Fuser In Sensor
[DI-57]
Interlock 24VDC
(Front)
[DI-e]
Regi Sensor
[DI-54]
Sensor Full Toner
[DI-6e]
OHP (Transparency)
Sensor
[DI-55]
Tray 1 Door Switch
[DI-f2]
Tray 1 Paper Path
Sensor
[DI-f3]
Tray 1 No paper
Sensor
[DI-f1]
Tray 2 Paper Path
Sensor
[DI-fb]
Tray 2 No paper
Sensor
[DI-f9]
Tray 2 Door Switch
[DI-fa]
Leg_Sec02_013FA