Network Set-Up; Print And Check The Printer Settings Page; Run The Installation Software - Dell 3100cn Owner's Manual

Network Set-Up

NOTE:
To use this printer in a UNIX or Linux environment, you need to install a UX Filter or Linux Driver.
For more information on how to install and use these, refer to your User's Guide.
NOTE:
When using a CD drive in a Linux environment, you need to mount the CD according to your
system environment. The command strings are mount/media/cdrom.
NOTE:
For additional network set-up configurations, refer to your User's Guide.

Print and Check the Printer Settings Page

Print the Printer Settings page.
1.
When Ready to Print appears in the LCD, press Menu.
a.
Press
b.
Press
c.
Printer Settings is displayed. Press
d.
The Printer Settings page is printed.
Under the TCP/IP heading, verify the IP address.
2.
If the IP address is 0.0.0.0, wait for a few minutes to resolve the IP address automatically,
and then print the Printer Settings page again.

Run the Installation Software

Insert the
1.
Drivers and Utilities
The
2.
If the CD does not automatically launch, click Start
the drive letter of your CD), and then click OK.
When the
3.
printer for use on a network. If using Windows XP, Windows 2000, Windows NT 4.0, or
Windows 2003 Server, go to step 4. For all other operating systems, go to step 5.
For local installation, select Local Installation - Install printer on this computer, and then
4.
click Next.
For remote installation:
Select Remote Installation - Install printer on one or more remote computers, and then
a.
click Next.
Enter your Administrator user name, password, and clients or servers and then click Add.
b.
Click Next.
c.
24
Setting Up for Network Printing
until Configure appears, and then press
until Reports appears, and then press
Drivers and Utilities
CD into your computer.
CD should launch the installation software automatically.
Drivers and Utilities CD screen appears, click Network Installation - Install the
or .
or .
.
Run, type D:\CDFE.exe (where D is
→