Network Set-Up; Attach Cables - Dell 1700/1700n Owner's Manual

Network Set-Up

NOTE: For additional network set-up configurations, refer to your

Attach Cables

Make sure the printer is turned off and unplugged.
1
Plug one end of a standard category 5 Unshielded Twisted Pair (UTP) network cable
2
into a LAN drop or hub, and the other end into the Ethernet port (the middle
connector) on the back of the printer. The printer automatically adjusts for the
network speed.
3 8 S e tt i n g U p fo r N e tw or k Pr i n ti n g
User's Guide .