Network Management (Snmp) Commands - D-Link DES-3350SR Reference Manual

The DES-3350SR supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. You can specify which
version of the SNMP you want to use to monitor and control the switch. The three versions of SNMP vary in the leve l of security
provided between the management station and the network device. The following table lists the security features of the three
SNMP versions:
The network management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
SNMP Version
v1
v2c
v3
v3
v3
Each command is listed, in detail, in the following sections.
Command
create snmp user
delete snmp user
show snmp user
create snmp view
delete snmp view
show snmp view
create snmp
community
delete snmp
community
show snmp
community
config snmp engineID
show snmp engineID
DES-3350SR Layer 3 Gigabit Switch
N M
ETWORK ANAGEMENT
Authentication Method
Community String
Community String
Username
MD5 or SHA
MD5 DES or SHA DES
Parameters
<username 32> <groupname 32> {encrypted [by_password auth
[md5 <auth_password 8-16> | sha <auth_password 8-20 >] priv
[none | des <priv_password 8-16>] | by_key auth [md5 <auth_key
32-32> | sha <auth_key 40-40>] priv [none | des <priv_key 32-32> ]]}
<username 32>
<view_name 32> <oid> view_type [included | excluded]
<view_name 32> [all | oid]
{<view_name 32>}
<community_string 32> view <view_name 32> [read_only |
read_write]
<community_string 32>
{<community_string 32>}
<snmp_engineID>
(SNMP) C
Description
Community String is used
NoAuthNoPriv
Community String is used
NoAuthNoPriv
Username is used for authentication
Authentication is based on the HMAC -MD5 or HMAC-SHA
algorithms AuthNoPriv
Authentication is based on the HMAC -MD5 or HMAC-SHA
algorithms AuthPriv.
DES 56-bit encryption is added based on the CBC-DES
(DES-56) standard
30
7
OMMANDS
for authentication
for authentication
NoAuthNoPriv