D-Link DES-3350SR Reference Manual page 110

config link_aggregation algorithm
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure link aggregation algorithm for mac-source-dest:
local>config link_aggregation algorithm mac_source_dest
Command: config link_aggregation algorithm mac_source_dest
Success.
local>
show link_aggregation
Purpose
Syntax
DES-3350SR Layer 3 Gigabit Switch
Used to configure the link aggregation algorithm.
config link_aggregation algorithm [mac_source |
mac_destination | mac_source_dest | ip_source | ip_destination
| ip_source_dest]
This command configures to part of the packet examined by the
switch when selecting the egress port for transmitting load-sharing
data. This feature is only available using the address-based load-
sharing algorithm.
mac_source Indicates that the switch should examine the MAC
source address.
mac_destination Indicates that the switch should examine the MAC
destination address.
mac_source_dest Indicates that the switch should examine the
MAC source and destination addresses
ip_source Indicates that the switch should examine the IP source
address.
ip_destination Indicates that the switch should examine the IP
destination address.
ip_source_dest Indicates that the switch should examine the IP
source address and the destination address.
Only administrator-level users can issue this command.
Used to display the current link aggregation configuration on the
switch.
show link_aggregation {group_id <value 1-6> | algorithm}
106