D-Link DES-3350SR Reference Manual page 113

show lacp_port
Parameters
Restrictions
Example usage:
To display LACP port mode settings:
local>show lacp_port 1:1-1:11
Command: show lacp_port 1:1-1:11
Port
------
1:1
1:2
1:3
1:4
1:5
1:6
1:7
1:8
1:9
1:10
1:11
local>
DES-3350SR Layer 3 Gigabit Switch
<portlist> - Specifies a range of ports that will be viewed. The port list
is specified by listing the lowest switch number and the beginning
port number on that switch, separated by a colon. Then the highest
switch number, and the highest port number of the range (also
separated by a colon) are specified. The beginning and end of the
port list range are separated by a dash. For example, 1:3 specifies
switch number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-
2:4 specifies all of the ports between switch 1, port 3 and switch 2,
port 4 in numerical order.
Only administrator-level users can issue this command.
Activity
--------
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
109