D-Link DES-3350SR Reference Manual page 464

Usage Example:
To delete an OSPF area:
config ospf area
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example
To configure an OSPF area's settings:
local>config ospf area 10.48.74.122 type stub stub_summary enable metric 1
Command: config ospf area 10.48.74.122 type stub stub_summary enable
metric 1
Success.
local>
show ospf area
Purpose
DES-3350SR Layer 3 Gigabit Switch
local>delete ospf area 10.48.74.122
Command: delete ospf area 10.48.74.122
Success.
local>
Used to configure an OSPF area's settings.
config ospf area <area_id> type [normal | stub
{stub_summary [enable | disable] | metric <value 0-
16777215>}]
This command is used to configure an OSPF area's settings.
<area_id> The OSPF area ID. The user may enter a 32-bit
number in the form of an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the OSPF domain.
type [normal | stub]
of operation stub or normal.
stub_summary [enable | disable]
of LSA advertisements to be enabled or disabled.
metric <value 0-16777215>
Only administrator-level users can issue this command.
Used to display an OSPF area's configuration.
Allows the specification of the OSPF mode
Allows the OSPF area import
The OSPF area stub default cost.
216