D-Link DES-3350SR Reference Manual page 414

config arpentry
Syntax
Description
Parameters
Restrictions
Example Usage:
To configure a static ARP entry for the IP address 10.48.74.12 and MAC address 00:50:BA:00:07:36:
local>config arpentry 10.48.74.12 00-50-BA-00-07-36
Command: config arpentry 10.48.74.12 00-50-BA-00-07-36
Success.
local>
delete arpentry
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To delete an entry of IP address 10.48.74.121 from the ARP table:
DES-3350SR Layer 3 Gigabit Switch
config arpentry <ipaddr> <macaddr>
This command is used to configure a static entry in the ARP Table.
The user may specify the IP address and the corresponding MAC
address of an entry in the switch's ARP table.
<ipaddr> The IP address of the end node or station.
<macaddr> The MAC address corresponding to the IP address
above.
Only administrator-level users can issue this command.
Used to delete a static entry into the ARP table.
delete arpentry {<ipaddr> | all}
This command is used to delete a static ARP entry, made using
the create arpentry command above, by specifying either the IP
address of the entry or all. Specifying all clears the switch's ARP
table.
<ipaddr> The IP address of the end node or station.
all Deletes all ARP entries.
Only administrator-level users can issue this command.
166