D-Link DES-3350SR Reference Manual page 40

local>show snmp view
Command: show snmp view
Vacm View Table Settings
View Name
--------------------
ReadView
WriteView
NotifyView
restricted
restricted
restricted
restricted
restricted
CommunityView
CommunityView
CommunityView
Total Entries: 11
local>
create snmp community
Purpose
Syntax
Description
DES-3350SR Layer 3 Gigabit Switch
Subtree
-------------------------
1
1
1.3.6
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1.3.6.1.6.3.10.2.1
1.3.6.1.6.3.11.2.1
1.3.6.1.6.3.15.1.1
1
1.3.6.1.6.3
1.3.6.1.6.3.1
Used to create an SNMP community string to define the relationship
between the SNMP manager and an agent. The community string
acts like a password to permit access to the agent on the switch.
One or more of the following characteristics can be associated with
the community string:
An Access List of IP addresses of SNMP managers that are
permitted to use the community string to gain access to the switch's
SNMP agent.
An MIB view that defines the subset of all MIB objects that will be
accessible to the SNMP community.
Read write or read-only level permission for the MIB objects
accessible to the SNMP community.
create snmp community <community_string 32> view
<view_name 32> [read_only | read_write]
The create snmp community command is used to create an SNMP
community string and to assign access-limiting characteristics to this
community string.
36
View Type
----------
Included
Included
Included
Included
Included
Included
Included
Included
Included
Excluded
Included