D-Link DES-3350SR Reference Manual page 210

show ipmc
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example
To display the current IP multicast interface table by DVMRP entry:
local>show ipmc ipif System protocol dvmrp
Command: show ipmc ipif System protocol dvmrp
Interface Name
---------------
System
Total Entries: 1
local>
DES-3350SR Layer 3 Gigabit Switch
Used to display the IP multicast interface table.
show ipmc {ipif <ipif_name 12> | protocol [dvmrp | pim]}
This command will display the current IP multicast interface table.
<ipif_name 12> The name of the IP interface for which you want
to display the IP multicast interface table for.
protocol [dvmrp | pim]
use the DVMRP or PIM protocol to display the IP multicast
interface table. For example, if DVMRP is specified, the table will
display only those entries that are related to the DVMRP protocol.
None.
IP Address Multicast Routing
--------------- ----------------
10.90.90.90 DVMRP
206
Allows the user to specify whether or not to