local>show ipif System
Command: show ipif System
IP Interface Settings
Interface Name
IP Address
Subnet Mask
VLAN Name
Admin. State
Link Status
Member Ports
local>
delete ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the IP interface named s2:
local>delete ipif s2
Command: delete ipif s2
Success.
local>
disable ipif
Purpose
DES-3350SR Layer 3 Gigabit Switch
: System
: 10.48.74.122
(MANUAL)
: 255.0.0.0
: default
: Disabled
: Link UP
: 1:1-1:12
Used to delete the configuration of an IP interface on the switch.
delete ipif <ipif_name 12 | all>
This command will delete the configuration of an IP interface on
the switch.
<ipif_name>
The name created for the IP interface.
all – Entering this parameter will delete all the IP interfaces
currently configured on the switch.
None.
Used to disable the configuration of an IP interface on the switch.
118