Network Management (Snmp) Commands - D-Link xStack DGS-3600 Series Cli Manual

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
The network management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
The Switch supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. After enabling SNMP, users can
specify which version of SNMP to use to monitor and control the Switch. Three versions of SNMP vary in the level of security
provided between the management station and the network device. The following table lists the security features of the three SNMP
versions:
SNMP
Version
v1
v2c
v3
v3
v3
The SNMP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
Command
enable snmp
disable snmp
enable snmp linkchange_traps
disable snmp linkchange_traps
config snmp linkchange_traps
ports
create snmp user
delete snmp user
show snmp user
create snmp view
delete snmp view
show snmp view
create snmp community
delete snmp community
show snmp community
config snmp engineID
N
ETWORK
Authentication
Method
Community String
Community String
Username
MD5 or SHA
MD5 DES or SHA DES
Parameters
[all|<portlist>][enable|disable]
<user_name 32> <groupname 32> {encrypted [by_password auth [md5
<auth_password 8-16 > | sha <auth_password 8-20 >] priv [none | des
<priv_password 8-16>] | by_key auth [md5 <auth_key 32-32>| sha <auth_key
40-40>] priv [none | des <priv_key 32-32>]]}
<user_name 32>
<view_name 32> <oid> view_type [included | excluded]
<view_name 32> [all | oid]
<view_name 32>
<community_string 32> view <view_name 32> [read_only | read_write]
<community_string 32>
<community_string 32>
<snmp_engineID>
M
ANAGEMENT
Description
Community String is
NoAuthNoPriv
Community String is
NoAuthNoPriv
Username is used for authentication − NoAuthNoPriv
Authentication is based on the HMAC-MD5 or HMAC-
SHA algorithms − AuthNoPriv
Authentication is based on the HMAC-MD5 or HMAC-
SHA algorithms − AuthPriv.
DES 56-bit encryption is added based on the CBC-DES
(DES-56) standard
32
(SNMP) C
used for authentication
used for authentication
8
OMMANDS
−
−