D-Link DES-3350SR Reference Manual page 305

traceroute
Parameters
Restrictions
Example usage:
To trace the routed path between the switch and 10.48.74.121.
local>traceroute 10.48.74.121 probe 3
Command: traceroute 10.48.74.121 probe 3
1 <10ms 10.254.254.251
2 <10ms 10.55.25.35
3 <10ms 10.22.35.1
local>
DES-3350SR Layer 3 Gigabit Switch
<ipaddr> - Specifies the IP address of the host.
ttl <value 1-60> - The time to live value of the trace route request.
This is the maximum number of routers the traceroute command will
cross while seeking the network path between two devices.
port <value 30000-64900> The port number. Must be above
1024.The value range is from 30000 to 64900 .
timeout <sec 1-65535>- Defines the time-out period while waiting for
a response from the remote device. The user may choose an entry
between 1 and 65535 seconds.
probe <value 1-9> - The probe value is the number of times the
switch will send probe packets to the next hop on the intended
traceroute path. The default is 1.
None.
57