D-Link DES-3350SR Reference Manual page 376

local>config router_ports default add 2:1-2:10
Command: config router_ports default add 2:1-2:10
Success.
local>
show router_ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the router ports.
local>show router_ports
Command: show router_ports
VLAN Name
Static router port
Dynamic router port :
VLAN Name
Static router port
Dynamic router port :
Total Entries: 2
local>
DES-3350SR Layer 3 Gigabit Switch
Used to display the currently configured router ports on the switch.
show router_ports {vlan <vlan_name 32>} {static | dynamic}
This command will display the router ports currently configured on
the switch.
<vlan_name 32> The name of the VLAN on which the router port
resides.
static Displays router ports that have been statically configured.
dynamic Displays router ports that have been dynamically
configured.
None.
: default
: 2:1-2:10
: vlan2
:
128